01
Brick / Tile Lining
Lining systems for floors, pits, drains, tanks and containment areas.
Ceramic
Vitrified
Carbon / Graphite
Service 01 · Corrosion-resistant lining
Protection designed around the actual exposure condition.
Chemisight develops corrosion-resistant lining systems for structures, equipment and containment areas where the complete build-up must respond to the actual substrate, exposure, temperature and service life.
Site-specificSystem selection
In-houseMaterial capability
CompleteSupply and execution
System cross-sectionHover over the build-up
Service surface
Wearing / lining course
Bedding / resin mortar
Barrier / interliner
Primer / bond coat
Prepared substrate
Complete lining build-up
A coordinated system, not an isolated material.
What this service covers
From substrate assessment to the completed protective build-up.
Corrosion-resistant lining is not simply the application of a chemical-resistant material. Long-term performance depends on the compatibility of the complete build-up: substrate preparation, primer or membrane, bedding layer, lining material, jointing system, curing and workmanship.
The build-up is evaluated for new construction, replacement of failed lining, localised repair, refurbishment and application-specific upgrades.
System compatibilityPerformance depends on how every layer, joint and interface works together.
System families
Protective systems selected for the actual exposure.
Available families include brick and tile lining, resin and silicate mortars, reinforced barriers, protective flooring and specialised membranes.
02
Mortar Systems
Mortar systems selected as per the chemical and service conditions.
Furan
Phenolic
Potassium silicate
Epoxy
Vinyl ester
CNSL
03
Fibre Reinforced Lining
Reinforced barrier systems for surface protection and chemical resistance.
Bisphenol
Vinyl ester
Isophthalic
Phenolic
Furan
Epoxy
04
Flooring & Protective Applications
High-performance flooring and protective build-ups for long service life and durability.
Epoxy
ScreedingCoatingSelf-levellingGrouting
Polyurethane
ScreedingCoatingSelf-levelling
Bitumen Mastic
Heavy-dutyAnti-staticAnti-skidTank-pad works
05
Membrane & Specialised Systems
Barrier systems for containment, protection and specialised civil applications.
Lead membrane lining
PVC membrane / Flexi Vinyl lining
HDPE / LDPE membrane lining
Mandana stone flooring
Magnesium oxychloride
Geosynthetic systems
System selection note
The final system depends on the chemical exposure, concentration, temperature, substrate, movement, traffic, abrasion, available shutdown and expected service life.
Where the systems are applied
Protective lining for structures and equipment exposed to demanding service conditions.
Applications vary widely in geometry, exposure and operating requirements. The lining build-up must therefore respond to the actual asset and not merely the broad industry category.
Tanks, vessels and reactors
Internal and external protective systems, refurbishment and replacement of existing lining.
Pits, sumps, drains and trenches
Containment surfaces exposed to liquids, chemicals, cleaning cycles and continuous moisture.
Floors and operating areas
Protective flooring, screeds and linings selected for exposure, traffic and functional requirements.
Equipment foundations and structural surfaces
Protection of concrete and steel substrates around critical equipment and process zones.
Effluent and containment structures
Lining for treatment areas, collection systems, channels and environmental containment applications.
Execution methodology
Performance is built through every stage of the work.
Hover over each stage to view the role it plays in the completed lining system.
Assess
Review exposure, substrate, drawings, operating conditions, failure history and project constraints.
Engineer
Select the system build-up, materials, thickness, detailing, joints and quality controls.
Prepare
Dismantle defective work where required and prepare concrete or steel to the specified condition.
Manufacture & supply
Produce or arrange compatible specialised materials with controlled batching and supply coordination.
Install
Execute primer, membrane, bedding, lining, jointing and detailing through trained site teams.
Inspect & hand over
Check workmanship, curing, thickness, continuity and specified quality parameters before completion.
System selection
The specification begins with the service condition.
A reliable recommendation requires more than a product name. The following inputs help determine the complete system.
Corrosion-resistant lining enquiry
Share your lining requirement.
Provide the available application, substrate, exposure and service-condition details below. The form is structured for later connection with Google Forms.